PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 09912M1
09912M1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.313 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, special_features: WITH PROTECTIVE INNER CASE, housing_bore_diameter: 0.999 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-409-4631, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
09912M1
NSN: 5330-00-409-4631
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.313 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
special_featuresWITH PROTECTIVE INNER CASE
housing_bore_diameter0.999 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-409-4631
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 09912M1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 0.375 INCHES NOMINAL IN
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
SPECIAL FEATURESWITH PROTECTIVE INNER CASE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER0.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.313 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
HOUSING BORE DIAMETER0.999 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
221ZInterchangeable
interchangeable cross-reference
interchangeable
1333Interchangeable
interchangeable cross-reference
interchangeable
3751-24DInterchangeable
interchangeable cross-reference
interchangeable
3751Interchangeable
interchangeable cross-reference
interchangeable
5KSP39FG4932TInterchangeable
interchangeable cross-reference
interchangeable
SM-C-861020Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 09912M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 09912M1?
09912M1 is a SEAL,PLAIN ENCASED.
What parts can replace 09912M1?
There are 11 known substitutes for 09912M1: 221Z, 1333, 3751-24D and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 09912M1?
09912M1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-409-4631. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 09912M1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026