PartsTable
Technical Data Sheet
Download PDF

0984892RH — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0984892RH: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_height: 4.070 INCHES NOMINAL IN, overall_length: 5.990 INCHES NOMINAL IN, special_features: RIGHT HAND; TWO SLOTS .44 X 1.00, mounting_hole_type: PLAIN, mounting_hole_diameter: 0.680 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-398-2339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0984892RH
NSN: 5340-01-398-2339
FSC: 5340 — Hardware, Commercial
CAGE: 5S241 — SUPERIOR FABRICATION COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL
overall_height4.070 INCHES NOMINAL IN
overall_length5.990 INCHES NOMINAL IN
special_featuresRIGHT HAND; TWO SLOTS .44 X 1.00
mounting_hole_typePLAIN
mounting_hole_diameter0.680 INCHES NOMINAL IN
mounting_hole_quantity1
material_document_and_classificationASTMA36 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-398-2339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0984892RH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA36 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.680 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
MOUNTING HOLE TYPE: PLAIN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
OVERALL HEIGHT4.070 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA36 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.680 INCHES NOMINAL IN
OVERALL LENGTH5.990 INCHES NOMINAL IN
SPECIAL FEATURESRIGHT HAND; TWO SLOTS .44 X 1.00
MATERIALSTEEL
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
053131RHReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0984892RH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0984892RH?
0984892RH is a BRACKET,MOUNTING.
What parts can replace 0984892RH?
There is 1 known substitute for 0984892RH: 053131RH. Substitute compatibility should be verified for your specific system.
What is the NSN for 0984892RH?
0984892RH is cataloged in the U.S. Government catalog under NSN 5340-01-398-2339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0984892RH