PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 09836
09836 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE,SPECIAL PURPOSE,ELECTRICAL. Key specifications include outside_diameter: 4.353 INCHES MINIMUM AND 4.397 INCHES MAXIMUM IN, aperture_diameter: 4.153 INCHES NOMINAL IN, cross-sectional_thickness: 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-168-1815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
09836
NSN: 5330-01-168-1815
FSC: 5330
CAGE: 98991 — WORCESTER CONTROLS CORP P O BOX 2609 COOKEVILLE TN 385022609 (USA)
SPECIFICATIONS
outside_diameter4.353 INCHES MINIMUM AND 4.397 INCHES MAXIMUM IN
aperture_diameter4.153 INCHES NOMINAL IN
cross-sectional_thickness0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
NSN5330-01-168-1815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 09836 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 4.353 INCHES MINIMUM AND 4.397 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 4.153 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
OUTSIDE DIAMETER4.353 INCHES MINIMUM AND 4.397 INCHES MAXIMUM IN
APERTURE DIAMETER4.153 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
09836Interchangeable
interchangeable cross-reference
interchangeable
9836Interchangeable
interchangeable cross-reference
interchangeable
N9836Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 09836?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 09836?
09836 is a CABLE,SPECIAL PURPOSE,ELECTRICAL.
What parts can replace 09836?
There are 3 known substitutes for 09836: 09836, 9836, N9836. Substitute compatibility should be verified for your specific system.
What is the NSN for 09836?
09836 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-168-1815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 09836

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026