PartsTable
Technical Data Sheet
Download PDF

097-044 BN40 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

097-044 BN40: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 40.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.097 INCHES NOMINAL IN, cross-sectional_height: 0.044 INCHES NOMINAL IN, end_item_identification: LF MODULE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-530-2192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
097-044 BN40
NSN: 5331-01-530-2192
FSC: 5331 — O-ring
CAGE: 55354 — UNIVERSITY OF TEXAS AT AUSTIN DIV APPLIED RESEARCH LABORATORIES (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating40.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.097 INCHES NOMINAL IN
cross-sectional_height0.044 INCHES NOMINAL IN
end_item_identificationLF MODULE
NSN5331-01-530-2192
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 097-044 BN40 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.044 INCHES NOMINAL IN
•
HARDNESS RATING: 40.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.097 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.044 INCHES NOMINAL IN
HARDNESS RATING40.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.097 INCHES NOMINAL IN
END ITEM IDENTIFICATIONLF MODULE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
SW000347 LINE ITEM 79Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 097-044 BN40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 097-044 BN40?
097-044 BN40 is a O-RING.
What parts can replace 097-044 BN40?
There is 1 known substitute for 097-044 BN40: SW000347 LINE ITEM 79. Substitute compatibility should be verified for your specific system.
What is the NSN for 097-044 BN40?
097-044 BN40 is cataloged in the U.S. Government catalog under NSN 5331-01-530-2192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 097-044 BN40