PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 094-0253-00
094-0253-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COTTON AND RUBBER SYNTHETIC OVERALL, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 0.437 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-829-0501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
094-0253-00
NSN: 5330-00-829-0501
FSC: 5330
CAGE: 10391 — CLINTON ENGINES CORP (USA)
SPECIFICATIONS
materialCOTTON AND RUBBER SYNTHETIC OVERALL
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter0.437 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMS-104-H GR H-3002 FSCM 79788 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-829-0501
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 094-0253-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MS-104-H GR H-3002 FSCM 79788 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: COTTON AND RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.437 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMS-104-H GR H-3002 FSCM 79788 MFR REF SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCIRCULAR
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALCOTTON AND RUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.437 INCHES NOMINAL IN
APERTURE DIAMETER0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
501P06080000AMBInterchangeable
interchangeable cross-reference
interchangeable
876105-012Interchangeable
interchangeable cross-reference
interchangeable
511-061800-00Interchangeable
interchangeable cross-reference
interchangeable
62A100C5001Interchangeable
interchangeable cross-reference
interchangeable
9225Interchangeable
interchangeable cross-reference
interchangeable
5950PL0809210Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 094-0253-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 094-0253-00?
094-0253-00 is a GASKET.
What parts can replace 094-0253-00?
There are 19 known substitutes for 094-0253-00: 501P06080000AMB, 876105-012, 511-061800-00 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 094-0253-00?
094-0253-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-829-0501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 094-0253-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026