PartsTable
Technical Data Sheet
PartsTable / O-RING / 093076-12X2ES
093076-12X2ES ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 0.462 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN, cross-sectional_height: 0.074 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-102-4452, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
093076-12X2ES
NSN: 5331-00-102-4452
FSC: 5331 — O-RING
CAGE: H2313 — ERIKS B.V. (NLD)
SPECIFICATIONS
materialRUBBER
center_hole_diameter0.462 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN
cross-sectional_height0.074 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
NSN5331-00-102-4452
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 093076-12X2ES MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.074 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 0.462 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.074 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
MATERIALRUBBER
CENTER HOLE DIAMETER0.462 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MS9385-06ESInterchangeable
interchangeable cross-reference
interchangeable
MS9385-06Interchangeable
interchangeable cross-reference
interchangeable
S8990-520Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 093076-12X2ES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 093076-12X2ES?
093076-12X2ES is a O-RING.
What parts can replace 093076-12X2ES?
There are 3 known substitutes for 093076-12X2ES: MS9385-06ES, MS9385-06, S8990-520. Substitute compatibility should be verified for your specific system.
Is 093076-12X2ES still available?
093076-12X2ES is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 093076-12X2ES

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026