PartsTable
Technical Data Sheet
Download PDF

092674 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

092674: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-018-0156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
092674
NSN: 5310-00-018-0156
FSC: 5310 — Nuts and Washers
CAGE: 1RGT9 — AUTOMATIC TIMING & CONTROLS, INC DBA AUTOMATIC TIMING & CONTROLS CO, INC DIV AUTOMATIC TIMING AND CONTROLS, INC (USA)
SPECIFICATIONS
hole_diameter0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
NSN5310-00-018-0156
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 092674 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
180156Reference document
Same NSN cross-reference
Reference document — Secondary reference
WASHERReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 092674?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 092674?
092674 is a WASHER,LOCK.
What parts can replace 092674?
There are 2 known substitutes for 092674: 180156, WASHER. Substitute compatibility should be verified for your specific system.
What is the NSN for 092674?
092674 is cataloged in the U.S. Government catalog under NSN 5310-00-018-0156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 092674

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.