PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0925499
0925499 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 8.0 MILLIMETERS NOMINAL MM, hole_diameter: 13.0 MILLIMETERS NOMINAL MM, overall_diameter: 59.0 MILLIMETERS MINIMUM AND 61.0 MILLIMETERS MAXIMUM MM, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-425-5473, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0925499
NSN: 5310-01-425-5473
FSC: 5310
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness8.0 MILLIMETERS NOMINAL MM
hole_diameter13.0 MILLIMETERS NOMINAL MM
overall_diameter59.0 MILLIMETERS MINIMUM AND 61.0 MILLIMETERS MAXIMUM MM
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-425-5473
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0925499 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 13.0 MILLIMETERS NOMINAL MM
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 59.0 MILLIMETERS MINIMUM AND 61.0 MILLIMETERS MAXIMUM MM
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 8.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HOLE DIAMETER13.0 MILLIMETERS NOMINAL MM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER59.0 MILLIMETERS MINIMUM AND 61.0 MILLIMETERS MAXIMUM MM
PERIPHERAL SHAPE STYLEROUND
THICKNESS8.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
JHP33-245Interchangeable
interchangeable cross-reference
interchangeable
T56-24OREQUALInterchangeable
interchangeable cross-reference
interchangeable
A1578Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0925499?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0925499?
0925499 is a WASHER,FLAT.
What parts can replace 0925499?
There are 3 known substitutes for 0925499: JHP33-245, T56-24OREQUAL, A1578. Substitute compatibility should be verified for your specific system.
What is the NSN for 0925499?
0925499 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-425-5473. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0925499

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026