PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0925018-4

0925018-4 — Technical Data Sheet

✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: ALUMINUM MOUNTING FACILITY, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.440 INCHES MAXIMUM IN, flat_height: 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, shaft_style: ROUND, FLATTED, bearing_type: SLEEVE SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-294-5873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0925018-4
NSN: 4730-01-294-5873
FSC: 4730
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
materialALUMINUM MOUNTING FACILITY
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.440 INCHES MAXIMUM IN
flat_height0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
shaft_styleROUND, FLATTED
bearing_typeSLEEVE SHAFT
shaft_length2.453 INCHES MINIMUM AND 2.547 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter2.410 INCHES MAXIMUM IN
mounting_typeFRAME
overall_width0.875 INCHES IN
overall_length2.201 INCHES IN
NSN4730-01-294-5873
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 0925018-4 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
215-22119-24Interchangeable
interchangeable cross-reference
interchangeable
65008Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-22/5Interchangeable
interchangeable cross-reference
interchangeable
RP151FK502KKInterchangeable
interchangeable cross-reference
interchangeable
SAE-AS25435Interchangeable
interchangeable cross-reference
interchangeable
MS25435-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0925018-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0925018-4?
0925018-4 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 0925018-4?
There are 6 known substitutes for 0925018-4: 215-22119-24, 65008, MIL-PRF-22/5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0925018-4?
0925018-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-294-5873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0925018-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026