PartsTable
Technical Data Sheet
0923566 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.869 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN, cross-sectional_height: 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-2462, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0923566
NSN: 5331-00-582-2462
FSC: 5331 — O-RING
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.869 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
cross-sectional_height0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
NSN5331-00-582-2462
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0923566 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 0.869 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT: 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.869 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
B4854AInterchangeable
interchangeable cross-reference
interchangeable
25032Interchangeable
interchangeable cross-reference
interchangeable
9578-2MInterchangeable
interchangeable cross-reference
interchangeable
D-3187Interchangeable
interchangeable cross-reference
interchangeable
PURCHASEDET5330-231-18Interchangeable
Same NIIN cross-reference
interchangeable
5330-231-18Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0923566?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0923566?
0923566 is a O-RING.
What parts can replace 0923566?
There are 6 known substitutes for 0923566: B4854A, 25032, 9578-2M and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0923566?
0923566 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-2462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0923566