PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0920-13
0920-13 ✓ Verified by PartsTable
Legrand · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a Legrand industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.102 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-770-2533, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0920-13
NSN: 5305-00-770-2533
FSC: 5305
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.102 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength800000 POUNDS PER SQUARE INCH LBS
NSN5305-00-770-2533
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0920-13 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.102 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MINIMUM TENSILE STRENGTH: 800000 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 2A A
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD LENGTH0.102 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MINIMUM TENSILE STRENGTH800000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.112 INCHES IN
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
G302437-31Interchangeable
interchangeable cross-reference
interchangeable
227053Interchangeable
interchangeable cross-reference
interchangeable
346444PC350Interchangeable
interchangeable cross-reference
interchangeable
AN505C4-6Interchangeable
interchangeable cross-reference
interchangeable
418974-4Interchangeable
interchangeable cross-reference
interchangeable
4177214-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0920-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0920-13?
0920-13 is a SCREW,MACHINE manufactured by Legrand.
What parts can replace 0920-13?
There are 31 known substitutes for 0920-13: G302437-31, 227053, 346444PC350 and 28 more. Substitute compatibility should be verified for your specific system.
Is 0920-13 still available?
0920-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0920-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026