PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0917531
0917531 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 482 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.625 INCHES NOMINAL IN, pin_overall_diameter: 0.2465 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.016 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0917531
NSN: 5315-00-014-1360
FSC: 5315
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialCOPPER ALLOY 482 OVERALL
first_end_styleCHAMFERED
pin_overall_length0.625 INCHES NOMINAL IN
pin_overall_diameter0.2465 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
material_document_and_classificationMIL-B-994 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-014-1360
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0917531 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.2465 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.625 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 482 OVERALL
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-994 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.2465 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.625 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 482 OVERALL
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-994 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
917554Interchangeable
interchangeable cross-reference
interchangeable
144138Interchangeable
interchangeable cross-reference
interchangeable
141360Interchangeable
interchangeable cross-reference
interchangeable
141505PC44Interchangeable
interchangeable cross-reference
interchangeable
016970Interchangeable
interchangeable cross-reference
interchangeable
1677771Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0917531?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0917531?
0917531 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 0917531?
There are 7 known substitutes for 0917531: 917554, 144138, 141360 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0917531?
0917531 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0917531

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026