PartsTable
Technical Data Sheet
Download PDF

0911054-5 — NUT,PLAIN,CASTELLATED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

0911054-5: NUT,PLAIN,CASTELLATED,HEXAGON.

The NUT,PLAIN,CASTELLATED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CASTELLATED, HEXAGON, nut_height: 0.552 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-529-8469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0911054-5
NSN: 5310-00-529-8469
FSC: 5310 — Nuts and Washers
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCASTELLATED, HEXAGON
nut_height0.552 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_across_flats0.750 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch20
NSN5310-00-529-8469
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0911054-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.552 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
•
NUT STYLE: CASTELLATED, HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.750 INCHES NOMINAL IN
THREAD SERIESUNF
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.552 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
NUT STYLECASTELLATED, HEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH20
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
117074Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
0911054Reference document
Same NSN cross-reference
Reference document — Secondary reference
911054Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 0911054-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0911054-5?
0911054-5 is a NUT,PLAIN,CASTELLATED,HEXAGON.
What parts can replace 0911054-5?
There are 3 known substitutes for 0911054-5: 117074, 0911054, 911054. Substitute compatibility should be verified for your specific system.
What is the NSN for 0911054-5?
0911054-5 is cataloged in the U.S. Government catalog under NSN 5310-00-529-8469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0911054-5