PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0910271-6
0910271-6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.341 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-958-5245, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0910271-6
NSN: 5305-00-958-5245
FSC: 5305
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.341 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-958-5245
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0910271-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY 2,CL MIL SPEC SINGLE TREATMENT RESPONSE
•
HEAD STYLE: FLAT COUNTERSUNK
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.341 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
HEAD DIAMETER0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY 2,CL MIL SPEC SINGLE TREATMENT RESPONSE
HEAD STYLEFLAT COUNTERSUNK
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS2A A
THREAD LENGTH0.341 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 2C STYLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
FF-B-171Interchangeable
interchangeable cross-reference
interchangeable
SSRI-1438RA1P16LO1Interchangeable
interchangeable cross-reference
interchangeable
SR6DK25/7Interchangeable
interchangeable cross-reference
interchangeable
18-307Interchangeable
interchangeable cross-reference
interchangeable
240-1097-00Interchangeable
interchangeable cross-reference
interchangeable
11389Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0910271-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0910271-6?
0910271-6 is a SCREW,MACHINE.
What parts can replace 0910271-6?
There are 28 known substitutes for 0910271-6: FF-B-171, SSRI-1438RA1P16LO1, SR6DK25/7 and 25 more. Substitute compatibility should be verified for your specific system.
Is 0910271-6 still available?
0910271-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0910271-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026