PartsTable
Technical Data Sheet
Download PDF

0910010 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0910010: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 2.688 INCHES NOMINAL IN, material: STEEL, outside_diameter: 1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN, style_designator: CONCAVE, material_thickness: 0.083 INCHES NOMINAL IN, material_document_and_classification: 66, 1008 TO 1022 FED STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-054-1410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0910010
NSN: 5340-00-054-1410
FSC: 5340 — Hardware, Commercial
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
radius2.688 INCHES NOMINAL IN
materialSTEEL
outside_diameter1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
style_designatorCONCAVE
material_thickness0.083 INCHES NOMINAL IN
material_document_and_classification66, 1008 TO 1022 FED STD SINGLE MATERIAL RESPONSE
NSN5340-00-054-1410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0910010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 2.688 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66, 1008 TO 1022 FED STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
RADIUS2.688 INCHES NOMINAL IN
OUTSIDE DIAMETER1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
MATERIAL DOCUMENT AND CLASSIFICATION66, 1008 TO 1022 FED STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 9
0910010-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
51460Reference document
Same NSN cross-reference
Reference document — Secondary reference
S702Reference document
Same NSN cross-reference
Reference document — Secondary reference
VT3479Reference document
Same NSN cross-reference
Reference document — Secondary reference
019-27Reference document
Same NSN cross-reference
Reference document — Secondary reference
128779Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0910010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0910010?
0910010 is a PLUG,EXPANSION.
What parts can replace 0910010?
There are 9 known substitutes for 0910010: 0910010-8, 51460, S702 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0910010?
0910010 is cataloged in the U.S. Government catalog under NSN 5340-00-054-1410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0910010