PartsTable
Technical Data Sheet
Download PDF

09078 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

09078: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include power_source: EXTERNAL, special_features: PUSHBUTTONS ARE USED TO SET THE RCVR TO A PARTICULAR OPERATING FREQ, maximum_overall_width: 3.000 INCHES IN, maximum_overall_height: 0.500 INCHES IN, maximum_overall_length: 3.000 INCHES IN, end_item_identification: RADIO RECEIVER,R-2174(P)/URR,5820010920435. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3706, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 09078
NSN: 3110-00-100-3706
NIINs: 001003706, 011137040
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
power_sourceEXTERNAL
special_featuresPUSHBUTTONS ARE USED TO SET THE RCVR TO A PARTICULAR OPERATING FREQ
maximum_overall_width3.000 INCHES IN
maximum_overall_height0.500 INCHES IN
maximum_overall_length3.000 INCHES IN
end_item_identificationRADIO RECEIVER,R-2174(P)/URR,5820010920435
NSN3110-00-100-3706
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 09078 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0460 INCHES NOMINAL IN
CONE WIDTH0.8480 INCHES NOMINAL IN
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
0005438Reference document
Same NSN cross-reference
Reference document — Secondary reference
7E6309Reference document
Same NSN cross-reference
Reference document — Secondary reference
70003Reference document
Same NSN cross-reference
Reference document — Secondary reference
SPC02133DReference document
Same NSN cross-reference
Reference document — Secondary reference
M32950Reference document
Same NSN cross-reference
Reference document — Secondary reference
0210812Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 09078?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 09078?
09078 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 09078?
There are 6 known substitutes for 09078: 0005438, 7E6309, 70003 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 09078?
09078 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3706. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 09078