PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0901287-3
0901287-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.509 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-0869, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0901287-3
NSN: 5305-00-010-0869
FSC: 5305
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.509 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
NSN5305-00-010-0869
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0901287-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
SCREW MATERIAL: STEEL
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
THREAD SERIES DESIGNATOR: UNF
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
SCREW MATERIALSTEEL
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.190 INCHES IN
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
THREAD SERIES DESIGNATORUNF
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.509 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
100869Interchangeable
interchangeable cross-reference
interchangeable
1008991Interchangeable
interchangeable cross-reference
interchangeable
100899Interchangeable
interchangeable cross-reference
interchangeable
100293Interchangeable
interchangeable cross-reference
interchangeable
100889Interchangeable
interchangeable cross-reference
interchangeable
9131Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0901287-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0901287-3?
0901287-3 is a SCREW,MACHINE.
What parts can replace 0901287-3?
There are 12 known substitutes for 0901287-3: 100869, 1008991, 100899 and 9 more. Substitute compatibility should be verified for your specific system.
Is 0901287-3 still available?
0901287-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0901287-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026