PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 09-41959
09-41959 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The HEAD,LINEAR ACTUATING CYLINDER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.1060 INCHES NOMINAL IN, overall_width: 0.6320 INCHES NOMINAL IN, surface_finish: GROUND, special_features: DRILL TWO 1/8 DIA HOLES AT45 DEG ANGLE 59/64 IN. FROM THE ID ON THE OUTER EDGE IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-614-9397, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
09-41959
NSN: 3110-00-614-9397
FSC: 3110
CAGE: 66654 — TVH PARTS CO. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.1060 INCHES NOMINAL IN
overall_width0.6320 INCHES NOMINAL IN
surface_finishGROUND
special_featuresDRILL TWO 1/8 DIA HOLES AT45 DEG ANGLE 59/64 IN. FROM THE ID ON THE OUTER EDGE IN
style_designatorINNER RING, ROLLER, DOUBLE LIP
smallest_outside_diameter2.2050 INCHES NOMINAL IN
NSN3110-00-614-9397
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 09-41959 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
SMALLEST OUTSIDE DIAMETER: 2.2050 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INNER RING, ROLLER, DOUBLE LIP
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.1060 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
SMALLEST OUTSIDE DIAMETER2.2050 INCHES NOMINAL IN
OVERALL WIDTH0.6320 INCHES NOMINAL IN
STYLE DESIGNATORINNER RING, ROLLER, DOUBLE LIP
SURFACE FINISHGROUND
SPECIAL FEATURESDRILL TWO 1/8 DIA HOLES AT45 DEG ANGLE 59/64 IN. FROM THE ID ON THE OUTER EDGE IN
BORE DIAMETER1.1060 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
21089Interchangeable
interchangeable cross-reference
interchangeable
400065Interchangeable
interchangeable cross-reference
interchangeable
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
5-060110BInterchangeable
interchangeable cross-reference
interchangeable
SAE J512 5 060110BInterchangeable
interchangeable cross-reference
interchangeable
A108-875Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 09-41959?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 09-41959?
09-41959 is a HEAD,LINEAR ACTUATING CYLINDER.
What parts can replace 09-41959?
There are 13 known substitutes for 09-41959: 21089, 400065, SAE-J512 and 10 more. Substitute compatibility should be verified for your specific system.
Is 09-41959 still available?
09-41959 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 09-41959

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026