PartsTable
Technical Data Sheet
Download PDF

08T01253-0000 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

08T01253-0000: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: SLEEVE, nut_diameter: 4.250 INCHES NOMINAL IN, nut_thickness: 2.200 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, nominal_thread_size: 2.000 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-056-1217, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
08T01253-0000
NSN: 5310-01-056-1217
FSC: 5310 — Nuts and Washers
CAGE: 01425 — LOUIS ALLIS CO THE THIS COMPANY HAS GONE BANKRUPT AND HAS BEEN PURCHASED BY 3 COMPANIES (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleSLEEVE
nut_diameter4.250 INCHES NOMINAL IN
nut_thickness2.200 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size2.000 INCHES IN
cross-sectional_shapeROUND OVERALL
drilled_hole_diameter0.406 INCHES NOMINAL IN
hole_type_and_quantity1 TAPPED AND 2 DRILLED
hole_configuration_styleCONFIGURATION J
thread_quantity_per_inch4-1/2
material_document_and_classificationMIL-B-24059 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5310-01-056-1217
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 08T01253-0000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE CONFIGURATION STYLE: CONFIGURATION J
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-24059 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.000 INCHES IN
•
NUT DIAMETER: 4.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND OVERALL
•
NUT THICKNESS: 2.200 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HOLE CONFIGURATION STYLECONFIGURATION J
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-24059 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.000 INCHES IN
NUT DIAMETER4.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND OVERALL
NUT THICKNESS2.200 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.406 INCHES NOMINAL IN
NUT STYLESLEEVE
THREAD QUANTITY PER INCH4-1/2
SUBSTITUTES & CROSS-REFERENCES 1
08X0036-01-01Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 08T01253-0000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 08T01253-0000?
08T01253-0000 is a NUT,SLEEVE.
What parts can replace 08T01253-0000?
There is 1 known substitute for 08T01253-0000: 08X0036-01-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 08T01253-0000?
08T01253-0000 is cataloged in the U.S. Government catalog under NSN 5310-01-056-1217. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 08T01253-0000

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.