PartsTable
Technical Data Sheet
Download PDF

08RT01-1 — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

08RT01-1: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.8160 INCHES MINIMUM AND 0.8180 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.5930 INCHES MINIMUM AND 0.5950 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: ONE PLATE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-249-6258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
08RT01-1
NSN: 3110-00-249-6258
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 05527 — GWILLIAM COMPANY, INC. DIV BALL & ROLLER BEARING DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.8160 INCHES MINIMUM AND 0.8180 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.5930 INCHES MINIMUM AND 0.5950 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresONE PLATE
style_designatorFLAT RACE SURFACE, CYLINDRICAL ROLLERS
overall_outside_diameter1.8745 INCHES MINIMUM AND 1.8755 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-249-6258
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 08RT01-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: FLAT RACE SURFACE, CYLINDRICAL ROLLERS
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.8745 INCHES MINIMUM AND 1.8755 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.8160 INCHES MINIMUM AND 0.8180 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.5930 INCHES MINIMUM AND 0.5950 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORFLAT RACE SURFACE, CYLINDRICAL ROLLERS
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.8745 INCHES MINIMUM AND 1.8755 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESONE PLATE
BORE DIAMETER0.8160 INCHES MINIMUM AND 0.8180 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
C5A28100Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 08RT01-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 08RT01-1?
08RT01-1 is a BEARING,ROLLER,THRUST.
What parts can replace 08RT01-1?
There is 1 known substitute for 08RT01-1: C5A28100. Substitute compatibility should be verified for your specific system.
What is the NSN for 08RT01-1?
08RT01-1 is cataloged in the U.S. Government catalog under NSN 3110-00-249-6258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 08RT01-1