PartsTable
Technical Data Sheet
Download PDF

08844001 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

08844001: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, bore_diameter: 5.9996 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN, contact_angle: 30.0 DEGREES NOMINAL, overall_width: 1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-010-2476, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
08844001
NSN: 3110-01-010-2476
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter5.9996 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN
contact_angle30.0 DEGREES NOMINAL
overall_width1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter8.4995 INCHES MINIMUM AND 8.5000 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMOLDED
NSN3110-01-010-2476
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 08844001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MOLDED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 8.4995 INCHES MINIMUM AND 8.5000 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMOLDED
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER8.4995 INCHES MINIMUM AND 8.5000 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE30.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
SUBSTITUTES & CROSS-REFERENCES 2
2534589Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
8844-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 08844001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 08844001?
08844001 is a BEARING,BALL,ANNULAR.
What parts can replace 08844001?
There are 2 known substitutes for 08844001: 2534589, 8844-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 08844001?
08844001 is cataloged in the U.S. Government catalog under NSN 3110-01-010-2476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 08844001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.