PartsTable
Technical Data Sheet
PartsTable / O-RING / 083-0800-03 ITEM 8

083-0800-03 ITEM 8 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN, center_hole_diameter: 4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-162-5805, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
083-0800-03 ITEM 8
NSN: 5331-00-162-5805
FSC: 5331 — O-RING
CAGE: 15342 — KONGSBERG MARITIME INC DBA KONGSBERG MARITIME INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN
center_hole_diameter4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationLOGISTICS SUPPORT VESSEL
NSN5331-00-162-5805
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 083-0800-03 ITEM 8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE331 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
6230XInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
72-6970-266InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
150BC02InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1405InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6230InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
454-4319InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 083-0800-03 ITEM 8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 083-0800-03 ITEM 8?
083-0800-03 ITEM 8 is a O-RING.
What parts can replace 083-0800-03 ITEM 8?
There are 29 known substitutes for 083-0800-03 ITEM 8: 6230X, 72-6970-266, 150BC02 and 26 more. Substitute compatibility should be verified for your specific system.
Is 083-0800-03 ITEM 8 still available?
083-0800-03 ITEM 8 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 083-0800-03 ITEM 8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026