PartsTable
Technical Data Sheet
Download PDF

082-68335-009 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

082-68335-009: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.103 INCHES NOMINAL IN, joint_type: SCARF-BEARING SURFACE BOTTOM RING, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, inside_diameter: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, outside_diameter: 0.329 INCHES NOMINAL IN, cross-sectional_shape_style: O-RING TOP RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-088-9341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
082-68335-009
NSN: 5330-01-088-9341
FSC: 5330 — Packing and Gasket Materials
CAGE: 5F573 — GREENE TWEED & CO INC (USA)
SPECIFICATIONS
height0.103 INCHES NOMINAL IN
joint_typeSCARF-BEARING SURFACE BOTTOM RING
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
inside_diameter0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
outside_diameter0.329 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING TOP RING
NSN5330-01-088-9341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 082-68335-009 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.329 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR BOTTOM RING
•
INSIDE DIAMETER: 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
HEIGHT: 0.103 INCHES NOMINAL IN
•
JOINT TYPE: SCARF-BEARING SURFACE BOTTOM RING
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.329 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR BOTTOM RING
CROSS-SECTIONAL SHAPE STYLEO-RING TOP RING
INSIDE DIAMETER0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
HEIGHT0.103 INCHES NOMINAL IN
JOINT TYPESCARF-BEARING SURFACE BOTTOM RING
SUBSTITUTES & CROSS-REFERENCES 3
S38421-0009BAE1SReference document
Same NSN cross-reference
Reference document — Secondary reference
S38421-009BAK1SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TFOPS-0090Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 082-68335-009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 082-68335-009?
082-68335-009 is a PACKING ASSEMBLY.
What parts can replace 082-68335-009?
There are 3 known substitutes for 082-68335-009: S38421-0009BAE1S, S38421-009BAK1S, TFOPS-0090. Substitute compatibility should be verified for your specific system.
What is the NSN for 082-68335-009?
082-68335-009 is cataloged in the U.S. Government catalog under NSN 5330-01-088-9341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 082-68335-009