PartsTable
Technical Data Sheet
Download PDF

0802-150-13G-F — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0802-150-13G-F: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include outside_diameter: 2.747 INCHES MINIMUM AND 2.812 INCHES MAXIMUM IN, special_features: NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 2.187 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN, cross-sectional_thickness: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, cross-sectional_shape_style: METAL WINDING W/ SOFT FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-387-4240, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0802-150-13G-F
NSN: 5330-01-387-4240
NIINs: 013874240, 013983697
FSC: 5330 — Packing and Gasket Materials
CAGE: 13902 — NEWDELL COMPANY, THE (USA)
SPECIFICATIONS
outside_diameter2.747 INCHES MINIMUM AND 2.812 INCHES MAXIMUM IN
special_featuresNON-ASBESTOS MATERIAL
style_designatorCIRCULAR
aperture_diameter2.187 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN
cross-sectional_thickness0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-387-4240
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0802-150-13G-F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 2.747 INCHES MINIMUM AND 2.812 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 2.187 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER2.747 INCHES MINIMUM AND 2.812 INCHES MAXIMUM IN
APERTURE DIAMETER2.187 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN
SPECIAL FEATURESNON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 1
800-150-13 NON-ASBESTOSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0802-150-13G-F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0802-150-13G-F?
0802-150-13G-F is a GASKET,SPIRAL WOUND.
What parts can replace 0802-150-13G-F?
There is 1 known substitute for 0802-150-13G-F: 800-150-13 NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for 0802-150-13G-F?
0802-150-13G-F is cataloged in the U.S. Government catalog under NSN 5330-01-387-4240. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0802-150-13G-F