PartsTable
Technical Data Sheet
PartsTable / O-RING / 080-04273-184
080-04273-184 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, center_hole_diameter: 1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-102-7609, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
080-04273-184
NSN: 5331-00-102-7609
FSC: 5331 — O-RING
CAGE: 94967 — BERNS MFG CORP
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
center_hole_diameter1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
NSN5331-00-102-7609
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 080-04273-184 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
MIL-P-25732CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 080-04273-184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 080-04273-184?
080-04273-184 is a O-RING.
What parts can replace 080-04273-184?
There is 1 known substitute for 080-04273-184: MIL-P-25732C. Substitute compatibility should be verified for your specific system.
What is the NSN for 080-04273-184?
080-04273-184 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-102-7609. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 080-04273-184

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026