PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 08-8425-126
08-8425-126 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 2.672 INCHES NOMINAL IN, center_hole_diameter: 2.297 INCHES NOMINAL IN, cross-sectional_height: 0.068 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-281-6517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
08-8425-126
NSN: 5330-01-281-6517
FSC: 5330
CAGE: 81616 — YORK INDUSTRIES, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter2.672 INCHES NOMINAL IN
center_hole_diameter2.297 INCHES NOMINAL IN
cross-sectional_height0.068 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-01-281-6517
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 08-8425-126 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CROSS-SECTIONAL HEIGHT: 0.068 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.672 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE DIAMETER: 2.297 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CROSS-SECTIONAL HEIGHT0.068 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.672 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CENTER HOLE DIAMETER2.297 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
36456Interchangeable
interchangeable cross-reference
interchangeable
59192DInterchangeable
interchangeable cross-reference
interchangeable
35630Interchangeable
interchangeable cross-reference
interchangeable
V42H-005X-12204Interchangeable
interchangeable cross-reference
interchangeable
V42H-00SX-12206Interchangeable
interchangeable cross-reference
interchangeable
15098-37135Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 08-8425-126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 08-8425-126?
08-8425-126 is a RETAINER,PACKING.
What parts can replace 08-8425-126?
There are 9 known substitutes for 08-8425-126: 36456, 59192D, 35630 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 08-8425-126?
08-8425-126 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-281-6517. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 08-8425-126

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026