07A568-905S — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

07A568-905S: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-558-1325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

07A568-905S

NSN: 5331-00-558-1325
FSC: 5331 — O-ring
CAGE: 76823 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN IS DIV NORTHROP GRUMMAN AERONAUTICS SYSTEMS (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
center_hole_diameter	0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
cross-sectional_height	0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN	5331-00-558-1325

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 4

B86002-905SSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

A-A-59588Reference document

Same NSN cross-reference

Reference document — Identification reference

3-5-S604-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS568-905Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 07A568-905S?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 07A568-905S?

07A568-905S is a O-RING.

What parts can replace 07A568-905S?

There are 4 known substitutes for 07A568-905S: B86002-905S, A-A-59588, 3-5-S604-7 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 07A568-905S?

07A568-905S is cataloged in the U.S. Government catalog under NSN 5331-00-558-1325. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

07A568-905S — O-RING

Request a Quote — 07A568-905S