PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07A314
07A314 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,PIPE TO BOSS is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OVERALL, flow_angle: 45.0 DEGREES, leg_length: 2.250 INCHES NOMINAL FIRST END IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A FIRST END BULKHEAD A, connection_type: THREADED EXTERNAL TUBE FIRST END BULKHEAD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-413-6005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07A314
NSN: 4730-01-413-6005
FSC: 4730
CAGE: 76823 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN IS DIV NORTHROP GRUMMAN AERONAUTICS SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OVERALL
flow_angle45.0 DEGREES
leg_length2.250 INCHES NOMINAL FIRST END IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A FIRST END BULKHEAD A
connection_typeTHREADED EXTERNAL TUBE FIRST END BULKHEAD
connection_styleFLARELESS (TUBE) ALL ENDS
special_featuresTHIS STANDARD PROVIDES AN IDENTIFYING NUMBER FOR AN,AS AND MS BULKHEAD FITTINGS WITH CHEMICAL CONVERSION COATING AT BULKHEAD INTERFACE FOR ELECTRICAL BONDING
surface_treatmentANODIZE OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size1.062 INCHES FIRST END BULKHEAD IN
maximum_operating_temp275.0 FAHRENHEIT SINGLE RESPONSE DEGF
NSN4730-01-413-6005
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 07A314 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 88044-AN833 GOVERNMENT STANDARD
•
THREAD CLASS: 3A FIRST END BULKHEAD A
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SEAT ANGLE: 37.0 DEGREES ALL ENDS
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END BULKHEAD
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.375 INCHES ALL ENDS IN
•
NOMINAL THREAD SIZE: 0.562 INCHES FIRST END BULKHEAD IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA88044-AN833 GOVERNMENT STANDARD
THREAD CLASS3A FIRST END BULKHEAD A
END ITEM IDENTIFICATIONAIRCRAFT B-2 BOMBER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SEAT ANGLE37.0 DEGREES ALL ENDS
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END BULKHEAD
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.375 INCHES ALL ENDS IN
NOMINAL THREAD SIZE0.562 INCHES FIRST END BULKHEAD IN
LEG LENGTH1.797 INCHES NOMINAL FIRST END IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MS24394D6Interchangeable
interchangeable cross-reference
interchangeable
4730PL0673298Interchangeable
interchangeable cross-reference
interchangeable
MS24396D6Interchangeable
interchangeable cross-reference
interchangeable
169021Interchangeable
interchangeable cross-reference
interchangeable
2B75 REV BInterchangeable
interchangeable cross-reference
interchangeable
706381 PIECE 39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07A314?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07A314?
07A314 is a ADAPTER,STRAIGHT,PIPE TO BOSS.
What parts can replace 07A314?
There are 23 known substitutes for 07A314: MS24394D6, 4730PL0673298, MS24396D6 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 07A314?
07A314 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-413-6005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07A314

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026