PartsTable
Technical Data Sheet
Download PDF

07937-5618-24 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

07937-5618-24: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.734 INCHES NOMINAL IN, overall_height: 0.734 INCHES NOMINAL IN, overall_length: 0.660 INCHES NOMINAL IN, style_designator: CLIP, material_thickness: 0.025 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-241-0430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07937-5618-24
NSN: 5340-01-241-0430
FSC: 5340 — Hardware, Commercial
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.734 INCHES NOMINAL IN
overall_height0.734 INCHES NOMINAL IN
overall_length0.660 INCHES NOMINAL IN
style_designatorCLIP
material_thickness0.025 INCHES NOMINAL IN
NSN5340-01-241-0430
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07937-5618-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLIP
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.734 INCHES NOMINAL IN
STYLE DESIGNATORCLIP
OVERALL LENGTH0.660 INCHES NOMINAL IN
OVERALL WIDTH0.734 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
C7937-5618Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
D7937-5618-24Reference document
Same NSN cross-reference
Reference document — Secondary reference
9375759Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 07937-5618-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07937-5618-24?
07937-5618-24 is a RETAINER,NUT AND BOLT.
What parts can replace 07937-5618-24?
There are 3 known substitutes for 07937-5618-24: C7937-5618, D7937-5618-24, 9375759. Substitute compatibility should be verified for your specific system.
What is the NSN for 07937-5618-24?
07937-5618-24 is cataloged in the U.S. Government catalog under NSN 5340-01-241-0430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07937-5618-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.