PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07935001166
07935001166 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 0.670 INCHES NOMINAL IN, center_hole_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_height: 0.156 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-335-7102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07935001166
NSN: 5330-01-335-7102
FSC: 5330
CAGE: 15187 — EMERSON AUTOMATION SOLUTIONS FINAL CONTROL US LP DIV NAVY PRODUCT TEAM (USA)
SPECIFICATIONS
peripheral_diameter0.670 INCHES NOMINAL IN
center_hole_diameter0.500 INCHES NOMINAL IN
cross-sectional_height0.156 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-01-335-7102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07935001166 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.670 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.156 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.670 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.156 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
20186PC18Interchangeable
interchangeable cross-reference
interchangeable
9635PC31Interchangeable
interchangeable cross-reference
interchangeable
9651PC37Interchangeable
interchangeable cross-reference
interchangeable
20139 PART A7935.001.166Interchangeable
Same NIIN cross-reference
interchangeable
A7935.001.166Interchangeable
Same NIIN cross-reference
interchangeable
A7935.001.166 PACKINGInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07935001166?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07935001166?
07935001166 is a PACKING,PREFORMED.
What parts can replace 07935001166?
There are 6 known substitutes for 07935001166: 20186PC18, 9635PC31, 9651PC37 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 07935001166?
07935001166 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-335-7102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07935001166

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026