PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0776600
0776600 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LEVER,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include overall_width: 1.500 INCHES NOMINAL IN, overall_length: 11.080 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), surface_treatment: PAINT, end_item_identification: 4320-01-524-4467; PUMP ASSEMBLY, FLAMMABLE LIQUID, BULK TRANSFER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-549-8360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0776600
NSN: 5340-01-549-8360
FSC: 5340
CAGE: 08SN2 — TITAN TIRE CORPORATION (USA)
SPECIFICATIONS
overall_width1.500 INCHES NOMINAL IN
overall_length11.080 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
surface_treatmentPAINT
end_item_identification4320-01-524-4467; PUMP ASSEMBLY, FLAMMABLE LIQUID, BULK TRANSFER
NSN5340-01-549-8360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0776600 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: THREADED HOLE(S)
•
SURFACE TREATMENT: PAINT
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODTHREADED HOLE(S)
SURFACE TREATMENTPAINT
OVERALL WIDTH1.500 INCHES NOMINAL IN
END ITEM IDENTIFICATION4320-01-524-4467; PUMP ASSEMBLY, FLAMMABLE LIQUID, BULK TRANSFER
OVERALL LENGTH11.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
7766Interchangeable
interchangeable cross-reference
interchangeable
1537766Interchangeable
interchangeable cross-reference
interchangeable
211603Interchangeable
interchangeable cross-reference
interchangeable
12708AInterchangeable
interchangeable cross-reference
interchangeable
0211603Interchangeable
interchangeable cross-reference
interchangeable
1539716Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0776600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0776600?
0776600 is a LEVER,MANUAL CONTROL.
What parts can replace 0776600?
There are 12 known substitutes for 0776600: 7766, 1537766, 211603 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0776600?
0776600 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-549-8360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0776600

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026