PartsTable
Technical Data Sheet
Download PDF

07512TYPEP — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

07512TYPEP: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, outside_diameter: 0.753 INCHES NOMINAL IN, housing_bore_diameter: 0.750 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-242-8363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07512TYPEP
NSN: 5330-00-242-8363
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
outside_diameter0.753 INCHES NOMINAL IN
housing_bore_diameter0.750 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1000 FEET PER MINUTE FT
NSN5330-00-242-8363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07512TYPEP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 0.753 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 0.750 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER0.753 INCHES NOMINAL IN
HOUSING BORE DIAMETER0.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.375 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 9
182150Reference document
Same NSN cross-reference
Reference document — Secondary reference
50385Reference document
Same NSN cross-reference
Reference document — Secondary reference
3687Reference document
IBM SAS Cbl Yi Syst to SAS 3m
Reference document — Secondary reference
50385SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
223299Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
075HMS12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 07512TYPEP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07512TYPEP?
07512TYPEP is a SEAL,PLAIN ENCASED.
What parts can replace 07512TYPEP?
There are 9 known substitutes for 07512TYPEP: 182150, 50385, 3687 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 07512TYPEP?
07512TYPEP is cataloged in the U.S. Government catalog under NSN 5330-00-242-8363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07512TYPEP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.