PartsTable
Technical Data Sheet
Download PDF

075-1221H34 — RING,BEARING,INNER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

075-1221H34: RING,BEARING,INNER.

The RING,BEARING,INNER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM IN, overall_width: 0.6300 INCHES NOMINAL IN, surface_finish: GROUND, special_features: 3/32 IN. BY 45 DEG CHAMFER ON ONE CORNER OD,0.1050 IN.

RADIUS ON ONE CORNER ID,COPPER PLATED IN. This part is cataloged in the U.S. Government catalog under NSN 3110-00-073-7032, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
075-1221H34
NSN: 3110-00-073-7032
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 66654 — TVH PARTS CO. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM IN
overall_width0.6300 INCHES NOMINAL IN
surface_finishGROUND
special_features3/32 IN. BY 45 DEG CHAMFER ON ONE CORNER OD,0.1050 IN. RADIUS ON ONE CORNER ID,COPPER PLATED IN
style_designatorSOLID INNER RACE, WITH BORE CHAMFER, JOURNAL AND NEEDLE
overall_outside_diameter1.2645 INCHES NOMINAL IN
NSN3110-00-073-7032
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 075-1221H34 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SOLID INNER RACE, WITH BORE CHAMFER, JOURNAL AND NEEDLE
•
OVERALL OUTSIDE DIAMETER: 1.2645 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
BORE DIAMETER: 0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORSOLID INNER RACE, WITH BORE CHAMFER, JOURNAL AND NEEDLE
OVERALL WIDTH0.6300 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.2645 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SPECIAL FEATURES3/32 IN. BY 45 DEG CHAMFER ON ONE CORNER OD,0.1050 IN. RADIUS ON ONE CORNER ID,COPPER PLATED IN
BORE DIAMETER0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
1221H34Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 075-1221H34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 075-1221H34?
075-1221H34 is a RING,BEARING,INNER.
What parts can replace 075-1221H34?
There is 1 known substitute for 075-1221H34: 1221H34. Substitute compatibility should be verified for your specific system.
What is the NSN for 075-1221H34?
075-1221H34 is cataloged in the U.S. Government catalog under NSN 3110-00-073-7032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 075-1221H34