PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0741C0019-8
0741C0019-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include height: 0.455 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, outside_diameter: 0.390 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-134-0567, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0741C0019-8
NSN: 5340-01-134-0567
FSC: 5340
CAGE: 54497 — MARTIN MARIETTA TECHNOLOGIES INC SUB OF MARTIN MARIETTA CORP AERO AND NAVAL SYSTEMS (USA)
SPECIFICATIONS
height0.455 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
outside_diameter0.390 INCHES NOMINAL IN
NSN5340-01-134-0567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0741C0019-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.390 INCHES NOMINAL IN
•
HEIGHT: 0.455 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.390 INCHES NOMINAL IN
HEIGHT0.455 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
1A552Interchangeable
interchangeable cross-reference
interchangeable
XLS4 3-4Interchangeable
interchangeable cross-reference
interchangeable
1A522Interchangeable
interchangeable cross-reference
interchangeable
S604Interchangeable
interchangeable cross-reference
interchangeable
MS35338-8Interchangeable
interchangeable cross-reference
interchangeable
40S33Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0741C0019-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0741C0019-8?
0741C0019-8 is a CLAMP,SYNCHRO.
What parts can replace 0741C0019-8?
There are 13 known substitutes for 0741C0019-8: 1A552, XLS4 3-4, 1A522 and 10 more. Substitute compatibility should be verified for your specific system.
Is 0741C0019-8 still available?
0741C0019-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0741C0019-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026