071310-7 — CLAMP,HUB

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

071310-7: CLAMP,HUB.

The CLAMP,HUB is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 923 OR COPPER ALLOY 903, thickness: 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, bore_diameter: 1.9500 INCHES NOMINAL IN, overall_width: 3.000 INCHES NOMINAL IN, overall_length: 3.500 INCHES NOMINAL IN, surface_finish: 100 MICROINCHES OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 3040-01-175-1155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

071310-7

NSN: 3040-01-175-1155
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 67060 — SEA CURE TECHNOLOGY, INC (USA)

SPECIFICATIONS

material	COPPER ALLOY 923 OR COPPER ALLOY 903
thickness	0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
bore_diameter	1.9500 INCHES NOMINAL IN
overall_width	3.000 INCHES NOMINAL IN
overall_length	3.500 INCHES NOMINAL IN
surface_finish	100 MICROINCHES OVERALL
style_designator	ROUND SECTIONAL W/TWO EXTENDED CLAMPING DEVICES
plain_hole_diameter	0.3750 INCHES NOMINAL IN
clamp_securing_hole_style	UNTHREADED
distance_from_bore_centerline_to_end	1.750 INCHES NOMINAL IN
material_document_and_classification	MIL-B-16540, GRADE A MIL SPEC SINGLE MATERIAL RESPONSE
NSN	3040-01-175-1155

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 100 MICROINCHES OVERALL

•

PLAIN HOLE DIAMETER: 0.3750 INCHES NOMINAL IN

•

CLAMP SECURING HOLE STYLE: UNTHREADED

•

STYLE DESIGNATOR: ROUND SECTIONAL W/TWO EXTENDED CLAMPING DEVICES

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-16540, GRADE A MIL SPEC SINGLE MATERIAL RESPONSE

•

DISTANCE FROM BORE CENTERLINE TO END: 1.750 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	100 MICROINCHES OVERALL
PLAIN HOLE DIAMETER	0.3750 INCHES NOMINAL IN
CLAMP SECURING HOLE STYLE	UNTHREADED
STYLE DESIGNATOR	ROUND SECTIONAL W/TWO EXTENDED CLAMPING DEVICES
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-16540, GRADE A MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH	3.500 INCHES NOMINAL IN
OVERALL WIDTH	3.000 INCHES NOMINAL IN
DISTANCE FROM BORE CENTERLINE TO END	1.750 INCHES NOMINAL IN
BORE DIAMETER	1.9500 INCHES NOMINAL IN
MATERIAL	COPPER ALLOY 923 OR COPPER ALLOY 903

SUBSTITUTES & CROSS-REFERENCES 2

5103114Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

501-5103114 ITEM 1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 071310-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 071310-7?

071310-7 is a CLAMP,HUB.

What parts can replace 071310-7?

There are 2 known substitutes for 071310-7: 5103114, 501-5103114 ITEM 1. Substitute compatibility should be verified for your specific system.

What is the NSN for 071310-7?

071310-7 is cataloged in the U.S. Government catalog under NSN 3040-01-175-1155. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

071310-7 — CLAMP,HUB

Request a Quote — 071310-7