PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 071008
071008 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), hardness_rating: 121.0 BRINELL STANDARD MINIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-5847, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
071008
NSN: 5310-00-014-5847
FSC: 5310
CAGE: 25022 — MARK BODY TRUCK AND EQUIPMENT INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
hardness_rating121.0 BRINELL STANDARD MINIMUM
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
end_item_identificationMRAP BUFFALO MK2A2
NSN5310-00-014-5847
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 071008 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 MIL SPEC ALL MATERIAL RESPONSES LOCKING INSERT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
•
BEARING SURFACE TYPE: CHAMFERED
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
WIDTH ACROSS FLATS: 0.489 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC ALL MATERIAL RESPONSES LOCKING INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
BEARING SURFACE TYPECHAMFERED
NOMINAL THREAD SIZE0.250 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
WIDTH ACROSS FLATS0.489 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
NUT STYLEHEXAGON
SURFACE TREATMENTZINC OVERALL EXCEPT INSERT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
071008Interchangeable
interchangeable cross-reference
interchangeable
061006Interchangeable
interchangeable cross-reference
interchangeable
061008Interchangeable
interchangeable cross-reference
interchangeable
11008Interchangeable
interchangeable cross-reference
interchangeable
16A4C2Interchangeable
interchangeable cross-reference
interchangeable
012316-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 071008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 071008?
071008 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 071008?
There are 13 known substitutes for 071008: 071008, 061006, 061008 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 071008?
071008 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-5847. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 071008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026