PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 071006
071006 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 1.9994 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN, overall_width: 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 2.3745 INCHES MINIMUM AND 2.3755 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-739-7052, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
071006
NSN: 3110-00-739-7052
FSC: 3110
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
bore_diameter1.9994 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
overall_width0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter2.3745 INCHES MINIMUM AND 2.3755 INCHES MAXIMUM IN
NSN3110-00-739-7052
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 071006 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.9994 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 2.3745 INCHES MINIMUM AND 2.3755 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BORE DIAMETER1.9994 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.3745 INCHES MINIMUM AND 2.3755 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
B328Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14651AInterchangeable
interchangeable cross-reference
interchangeable
MIL-I-14651Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14651Interchangeable
interchangeable cross-reference
interchangeable
E106-758-95Interchangeable
interchangeable cross-reference
interchangeable
B3280HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 071006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 071006?
071006 is a BEARING,ROLLER,NEEDLE.
What parts can replace 071006?
There are 8 known substitutes for 071006: B328, MIL-DTL-14651A, MIL-I-14651 and 5 more. Substitute compatibility should be verified for your specific system.
Is 071006 still available?
071006 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 071006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026