PartsTable
Technical Data Sheet
Download PDF

07058AB — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

07058AB: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.425 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN, surface_treatment: ZINC CASE, housing_bore_diameter: 3.225 INCHES MINIMUM AND 3.229 INCHES MAXIMUM IN, sealing_element_style: VERTICAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-422-7890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07058AB
NSN: 5330-00-422-7890
FSC: 5330 — Packing and Gasket Materials
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.425 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
surface_treatmentZINC CASE
housing_bore_diameter3.225 INCHES MINIMUM AND 3.229 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
NSN5330-00-422-7890
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07058AB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.425 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 3.225 INCHES MINIMUM AND 3.229 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.425 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER3.225 INCHES MINIMUM AND 3.229 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
SURFACE TREATMENTZINC CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
A27319Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 07058AB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07058AB?
07058AB is a SEAL,PLAIN ENCASED.
What parts can replace 07058AB?
There is 1 known substitute for 07058AB: A27319. Substitute compatibility should be verified for your specific system.
What is the NSN for 07058AB?
07058AB is cataloged in the U.S. Government catalog under NSN 5330-00-422-7890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07058AB