PartsTable / O-RING / 07-FC-018-P
07-FC-018-P
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, center_hole_diameter: 2.099 INCHES MINIMUM AND 2.119 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-017-0700, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
07-FC-018-P
NSN: 5331-01-017-0700 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF center_hole_diameter 2.099 INCHES MINIMUM AND 2.119 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-01-017-0700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 07-FC-018-P
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 2.099 INCHES MINIMUM AND 2.119 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 2.099 INCHES MINIMUM AND 2.119 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
73670 Interchangeable interchangeable cross-reference
interchangeable
401254 Interchangeable interchangeable cross-reference
interchangeable
T0591 Interchangeable interchangeable cross-reference
interchangeable
MS29513-227ES Interchangeable interchangeable cross-reference
interchangeable
3013919 Interchangeable interchangeable cross-reference
interchangeable
6515NCM020657 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 07-FC-018-P?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-FC-018-P?
07-FC-018-P is a O-RING.
What parts can replace 07-FC-018-P?
There are 10 known substitutes for 07-FC-018-P: 73670, 401254, T0591 and 7 more. Substitute compatibility should be verified for your specific system.
Is 07-FC-018-P still available?
07-FC-018-P is currently cancelled.
Request a Quote — 07-FC-018-P