PartsTable
Technical Data Sheet
07-865778 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.312 INCHES NOMINAL IN, overall_length: 7.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-371-5008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-865778
NSN: 5330-00-371-5008
FSC: 5330
CAGE: 66654 — TVH PARTS CO. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.312 INCHES NOMINAL IN
overall_length7.438 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-371-5008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07-865778 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL: RUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH6.312 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
OVERALL LENGTH7.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
30-259Interchangeable
interchangeable cross-reference
interchangeable
DD660AInterchangeable
interchangeable cross-reference
interchangeable
98000071-1Interchangeable
interchangeable cross-reference
interchangeable
A30259Interchangeable
interchangeable cross-reference
interchangeable
MS3102R36-7PZInterchangeable
interchangeable cross-reference
interchangeable
SAE-AS50151Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07-865778?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-865778?
07-865778 is a GASKET.
What parts can replace 07-865778?
There are 12 known substitutes for 07-865778: 30-259, DD660A, 98000071-1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 07-865778?
07-865778 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-371-5008. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-865778