PartsTable
Technical Data Sheet
Download PDF

07-6010 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

07-6010: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include nut_length: 0.610 INCHES NOMINAL IN, nut_diameter: 0.500 INCHES NOMINAL IN, thread_class: 2B, flange_diameter: 1.031 INCHES NOMINAL IN, flange_thickness: 0.390 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-887-3622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-6010
NSN: 5310-00-887-3622
NIINs: 008873622, 014063904
FSC: 5310 — Nuts and Washers
CAGE: 91816 — CIRCOR AEROSPACE, INC. DBA CIRCOR AEROSPACE INC (USA)
SPECIFICATIONS
nut_length0.610 INCHES NOMINAL IN
nut_diameter0.500 INCHES NOMINAL IN
thread_class2B
flange_diameter1.031 INCHES NOMINAL IN
flange_thickness0.390 INCHES NOMINAL IN
thread_directionRIGHT-HAND
NSN5310-00-887-3622
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 07-6010 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 1.031 INCHES NOMINAL IN
•
NUT LENGTH: 0.610 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.390 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NUT DIAMETER: 0.500 INCHES NOMINAL IN
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER1.031 INCHES NOMINAL IN
NUT LENGTH0.610 INCHES NOMINAL IN
FLANGE THICKNESS0.390 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NUT DIAMETER0.500 INCHES NOMINAL IN
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 1
2227-0008Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 07-6010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-6010?
07-6010 is a NUT,SLEEVE.
What parts can replace 07-6010?
There is 1 known substitute for 07-6010: 2227-0008. Substitute compatibility should be verified for your specific system.
What is the NSN for 07-6010?
07-6010 is cataloged in the U.S. Government catalog under NSN 5310-00-887-3622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-6010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.