PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07-201031
07-201031 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.750 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 3.438 INCHES NOMINAL IN, bolt_circle_diameter: 4.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-8538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-201031
NSN: 5330-00-358-8538
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.750 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter3.438 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter4.000 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
cross-sectional_thickness0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center2.218 INCHES NOMINAL IN
NSN5330-00-358-8538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07-201031 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 3.438 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 4.000 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 2.218 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORNON-CIRCULAR
APERTURE DIAMETER3.438 INCHES NOMINAL IN
OVERALL WIDTH4.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER4.000 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER2.218 INCHES NOMINAL IN
MATERIALPAPER OVERALL
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
ZA71024Interchangeable
interchangeable cross-reference
interchangeable
201031Interchangeable
interchangeable cross-reference
interchangeable
10669615Interchangeable
interchangeable cross-reference
interchangeable
PW5-1.0OHM-10PCTInterchangeable
interchangeable cross-reference
interchangeable
10620BE-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07-201031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-201031?
07-201031 is a GASKET.
What parts can replace 07-201031?
There are 5 known substitutes for 07-201031: ZA71024, 201031, 10669615 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 07-201031?
07-201031 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-8538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-201031

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026