PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07-101332
07-101332 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, material: STEEL COMP 1010, overall_height: 1.188 INCHES NOMINAL IN, stock_diameter: 0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN, style_designator: PIN, casehardening_indicator: NOT CASEHARDENED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-382-8970, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-101332
NSN: 5340-00-382-8970
FSC: 5340
CAGE: 66654 — TVH PARTS CO. (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
materialSTEEL COMP 1010
overall_height1.188 INCHES NOMINAL IN
stock_diameter0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
style_designatorPIN
casehardening_indicatorNOT CASEHARDENED
material_document_and_classificationSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-382-8970
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07-101332 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
MATERIAL: STEEL COMP 1010
•
STYLE DESIGNATOR: PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
•
WIDTH: 0.750 INCHES NOMINAL IN
•
STOCK DIAMETER: 0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASEHARDENING INDICATORNOT CASEHARDENED
MATERIALSTEEL COMP 1010
STYLE DESIGNATORPIN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
WIDTH0.750 INCHES NOMINAL IN
OVERALL HEIGHT1.188 INCHES NOMINAL IN
STOCK DIAMETER0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
03031-50Interchangeable
interchangeable cross-reference
interchangeable
3B4128Interchangeable
interchangeable cross-reference
interchangeable
W-31Interchangeable
interchangeable cross-reference
interchangeable
B107.52 TY2CL2Interchangeable
interchangeable cross-reference
interchangeable
BP0-412-6Interchangeable
interchangeable cross-reference
interchangeable
AA59484-2A05Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07-101332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-101332?
07-101332 is a CLIP,RETAINING.
What parts can replace 07-101332?
There are 13 known substitutes for 07-101332: 03031-50, 3B4128, W-31 and 10 more. Substitute compatibility should be verified for your specific system.
Is 07-101332 still available?
07-101332 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-101332

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026