PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07-101255
07-101255 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.703 INCHES NOMINAL IN, housing_bore_diameter: 3.623 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-0054, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-101255
NSN: 5330-00-359-0054
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.703 INCHES NOMINAL IN
housing_bore_diameter3.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1500 FEET PER MINUTE FT
NSN5330-00-359-0054
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07-101255 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
•
SEAL WIDTH: 0.703 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1500 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
SEAL WIDTH0.703 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1500 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
HE-1015Interchangeable
interchangeable cross-reference
interchangeable
10197289Interchangeable
interchangeable cross-reference
interchangeable
M5423/14-05Interchangeable
interchangeable cross-reference
interchangeable
AN503-8-8Interchangeable
interchangeable cross-reference
interchangeable
78315Interchangeable
interchangeable cross-reference
interchangeable
931.45.16.310Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07-101255?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-101255?
07-101255 is a SEAL,PLAIN ENCASED.
What parts can replace 07-101255?
There are 25 known substitutes for 07-101255: HE-1015, 10197289, M5423/14-05 and 22 more. Substitute compatibility should be verified for your specific system.
Is 07-101255 still available?
07-101255 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-101255

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026