PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07-101253
07-101253 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,SEAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bolt_circle_diameter: 6.125 INCHES NOMINAL IN, mounting_flange_diameter: 7.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-9993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-101253
NSN: 5330-00-358-9993
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bolt_hole_quantity8
bolt_circle_diameter6.125 INCHES NOMINAL IN
mounting_flange_diameter7.625 INCHES NOMINAL IN
NSN5330-00-358-9993
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07-101253 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 8
•
MOUNTING FLANGE DIAMETER: 7.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BOLT CIRCLE DIAMETER: 6.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY8
MOUNTING FLANGE DIAMETER7.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BOLT CIRCLE DIAMETER6.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
10120720Interchangeable
interchangeable cross-reference
interchangeable
912-3107-0635Interchangeable
interchangeable cross-reference
interchangeable
MF4CC2001BInterchangeable
interchangeable cross-reference
interchangeable
10125-3Interchangeable
interchangeable cross-reference
interchangeable
CH152Interchangeable
interchangeable cross-reference
interchangeable
E169026Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07-101253?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-101253?
07-101253 is a RETAINER,SEAL.
What parts can replace 07-101253?
There are 12 known substitutes for 07-101253: 10120720, 912-3107-0635, MF4CC2001B and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 07-101253?
07-101253 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-9993. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-101253

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026