PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07-100453
07-100453 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.812 INCHES NOMINAL IN, height: 1.000 INCHES NOMINAL IN, length: 2.375 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.562 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-153-7668, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07-100453
NSN: 5340-00-153-7668
FSC: 5340
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
width0.812 INCHES NOMINAL IN
height1.000 INCHES NOMINAL IN
length2.375 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.562 INCHES NOMINAL IN
furnished_itemsLOCKNUT
NSN5340-00-153-7668
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 07-100453 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.812 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
LENGTH: 2.375 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH0.812 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
LENGTH2.375 INCHES NOMINAL IN
HOLE DIAMETER0.562 INCHES NOMINAL IN
HEIGHT1.000 INCHES NOMINAL IN
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
81001Interchangeable
interchangeable cross-reference
interchangeable
80004CInterchangeable
interchangeable cross-reference
interchangeable
10089APC1Interchangeable
interchangeable cross-reference
interchangeable
8100/1Interchangeable
interchangeable cross-reference
interchangeable
81001ADXInterchangeable
interchangeable cross-reference
interchangeable
SPS-N-05896Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07-100453?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07-100453?
07-100453 is a CLAMP,SYNCHRO.
What parts can replace 07-100453?
There are 16 known substitutes for 07-100453: 81001, 80004C, 10089APC1 and 13 more. Substitute compatibility should be verified for your specific system.
Is 07-100453 still available?
07-100453 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07-100453

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026