PartsTable
Technical Data Sheet
Download PDF

06A8165048 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

06A8165048: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 462 OR COPPER ALLOY 464 OVERALL, nut_style: HEXAGON, nut_height: 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-939-2653, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06A8165048
NSN: 5310-00-939-2653
FSC: 5310 — Nuts and Washers
CAGE: 5B5M3 — DEVCOM CHEMICAL BIOLOGICAL CENTER DBA CHEMICAL BIOLOGICAL CENTER DIV U.S. DEPT OF ARMY (USA)
SPECIFICATIONS
materialCOPPER ALLOY 462 OR COPPER ALLOY 464 OVERALL
nut_styleHEXAGON
nut_height0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentBLACK OXIDE OVERALL
width_across_flats0.4280 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch20
material_document_and_classificationQQ-B-637,COMP 4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-637,COMP 1 FED SPEC 2ND MATERIAL RESPONSE OVERALL
NSN5310-00-939-2653
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 06A8165048 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.4280 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-637,COMP 4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-637,COMP 1 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
SURFACE TREATMENT: BLACK OXIDE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.4280 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-637,COMP 4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-637,COMP 1 FED SPEC 2ND MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
SURFACE TREATMENTBLACK OXIDE OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 7
5310005434971Reference document
Same NSN cross-reference
Reference document — Secondary reference
AEN04C250000BE2A11Reference document
Same NSN cross-reference
Reference document — Secondary reference
114379Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
118557Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
F334Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 06A8165048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06A8165048?
06A8165048 is a NUT,PLAIN,HEXAGON.
What parts can replace 06A8165048?
There are 7 known substitutes for 06A8165048: 5310005434971, AEN04C250000BE2A11, 114379 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06A8165048?
06A8165048 is cataloged in the U.S. Government catalog under NSN 5310-00-939-2653. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06A8165048

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.