PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 069-00400
069-00400 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM IN, material: STEEL COMP 1118 OVERALL, overall_length: 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES SHANK END, undercut_width: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN, first_end_style: CHAMFERED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-869-0697, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
069-00400
NSN: 5315-00-869-0697
FSC: 5315
CAGE: 33269 — AIRCRAFT WHEEL AND BRAKE, LLC DBA CLEVELAND WHEEL AND BRAKE SYSTEMS (USA)
SPECIFICATIONS
diameter0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM IN
materialSTEEL COMP 1118 OVERALL
overall_length0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES SHANK END
undercut_width0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
first_end_styleCHAMFERED
hardness_rating53.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
undercut_radius0.005 INCHES MAXIMUM IN
effective_length0.760 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
style_designatorGROOVE
undercut_diameter0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
NSN5315-00-869-0697
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 069-00400 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
SURFACE FINISH: 63.0 MICROINCHES SHANK END
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 53.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER ANGLE: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
•
STYLE DESIGNATOR: GROOVE
•
FIRST END LOCATION: BOTH ENDS
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
SURFACE FINISH63.0 MICROINCHES SHANK END
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING53.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
STYLE DESIGNATORGROOVE
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL COMP 1118 OVERALL
OVERALL LENGTH0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
8N9TJPInterchangeable
interchangeable cross-reference
interchangeable
694Interchangeable
interchangeable cross-reference
interchangeable
8175464Interchangeable
interchangeable cross-reference
interchangeable
694-00Interchangeable
interchangeable cross-reference
interchangeable
2959Interchangeable
interchangeable cross-reference
interchangeable
51B274Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 069-00400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 069-00400?
069-00400 is a PIN,GROOVED,HEADLESS.
What parts can replace 069-00400?
There are 17 known substitutes for 069-00400: 8N9TJP, 694, 8175464 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 069-00400?
069-00400 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-869-0697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 069-00400

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026