PartsTable
Technical Data Sheet
PartsTable / O-RING / 06892

06892 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE, hole_diameter: 0.110 INCHES NOMINAL IN, overall_width: 0.200 INCHES NOMINAL IN, overall_length: 0.840 INCHES NOMINAL IN, style_designator: NON-CIRCULAR W/BEVELED CORNERS, surface_treatment: PASSIVATE. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-482-4460, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06892
NSN: 5331-00-482-4460
FSC: 5331 — O-RING
CAGE: 98991 — WORCESTER CONTROLS CORP P O BOX 2609 COOKEVILLE TN 385022609 (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE
hole_diameter0.110 INCHES NOMINAL IN
overall_width0.200 INCHES NOMINAL IN
overall_length0.840 INCHES NOMINAL IN
style_designatorNON-CIRCULAR W/BEVELED CORNERS
surface_treatmentPASSIVATE
bolt_hole_quantity2
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
outside_corner_bevel_length_along_width0.050 INCHES NOMINAL IN
outside_corner_bevel_length_along_length0.050 INCHES NOMINAL IN
bolt_hole_centerline_to_nearest_edge_distance0.100 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.080 INCHES NOMINAL IN
NSN5331-00-482-4460
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 06892 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 2.730 INCHES MINIMUM AND 2.782 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 331 MAXIMUM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER2.730 INCHES MINIMUM AND 2.782 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE331 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
151394InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS19081-224InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
703145InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
PRP568-145-457-60InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
SR-822A-60-145InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06892?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06892?
06892 is a RESISTOR,FIXED,COMPOSITION.
What parts can replace 06892?
There are 20 known substitutes for 06892: 151394, MS19081-224, 703145 and 17 more. Substitute compatibility should be verified for your specific system.
Is 06892 still available?
06892 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06892

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026