The Screw,machine, cataloged under National Stock Number 5305-00-282-0115, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5305-00-282-0115 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | CANCELLED |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 1.828 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN |
| Thread Length | 0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | CANCELLED |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN509-10R29REV2 | 5/1 Secondary reference U.S. Government activity |
| MILS7839 | 5/9 Secondary reference U.S. Government activity |
| MILS7839 | 5/1 Secondary reference U.S. Government activity |
| AN509-10R29 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-282-0115 is a Screw,machine, classified under FSC 5305, Screws. Status: cancelled.
Key specifications for 5305-00-282-0115: Screw Surface Treatment: CADMIUM; Fastener Length: 1.828 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN; Thread Length: 0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5305-00-282-0115 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.